Basic indicator introduction of aerial lifting platform

Aerial work platforms key performance indicators are: operating height, operating margin, operating speed and loading mass.



( 1 ) aerial work platforms operating altitude
Working height is the sum of the average height of the platform from the ground at the bottom of the height that the operating personnel arm can achieved. Typically, working height is sorted into operation within the operating height maximum height and maximum operating operation range.
During aerial working operations, in addition to indicating the job above ground, aerial work platforms also need to detect the depth according to the instructions from ground.
( 2 ) aerial work platforms operating range
Operating range is rotating aerial work vehicle centerline ( vertical lift aerial platform lift to centerline ) edge level to work on the platform.
( 3 ) aerial work platforms operating speed
Operating speed aerial work platforms include: the speed of rotation of the operation on the platform in the vertical direction and the average decline rate of speed. As the national standard GB 94652-88 is specified, for lifting platforms, the decline rate is of 0.5 m / s or less; the maximum rotation speed of slewing mechanism is less than 2r/min.
( 4 ) aerial platform work platform loading mass
Load weight of aerial work platform is the set standard loaded quality, the quality does not contain the lifting platform itself.