Truck scissor lift brake failure solutions for new users

If brake failure occurs while the truck scissor lift is in motion, the users should know how to deal with this situation, especially for the new users, here are some very useful advices from Tianjin Anson:


1. While controlling the truck scissor lift direction according to road conditions and vehicle speed, disengaged high speed gear, and quickly empty the oil boom foot, shift high-speed gear into low speed gear. Thus, the engine will create great resistance to traction speed decreased rapidly. In addition, the downshift while using the handbrake should be too tight or released too slowly.If you pull the handbrake too tight, easy to make the brake disc "locking" is likely to damage the mechanical transmission loss of braking ability; if you pull too fast, brake disc would wear erosion and would damage its braking effect.

2. Make use of car bumpers and other car parts or natural obstacles, such as steel and roadside (rocks, trees or slope) friction, collision, to forcibly stop the truck scissor lift, it would reduce the accident rate as much as possible.

3. when truck scissor lift brake failure occurs on uphill, truck scissor lift operator should be timely reduce to low gear and maintain sufficient momentum until onto the top of the hill to stop. For parking on the tilt road, the speed should be kept low forward gear; tighten the hand brake; attendant promptly with stones, skids and other objects jammed wheel. If after the slip phenomenon, the driving direction should be directed to the rear side of the hillside or the relatively safe side, and open headlights and emergency lights, to alarm the vehicles around.